Introduction hanging plastic epoxy modified main components: A Group: modified epoxy resin, silica Group B: hardener Features: 1, the hanging plastic epoxy modified to retain all the epoxy The advantages of epoxy curing slow abandoned inadequate; meet the "stone walls with epoxy adhesive]" standard. 2, for the year (-15 ℃ ~ 40 ℃) construction, construction convenient, curing unaffected. 3, the cure does not return after the stone surface oil, do not pollute the stone. High bond strength, good toughness. 4, fast curing, increase or decrease the amount of curing agent can adjust the curing time. 5, after curing, high bond strength, good toughness. 6, when the stone hanging project, not marble glue positioning, the direct use of the glue dry hanging, cost savings and shorten the construction period. Usage: 1, was asked to dry, clean the bonding surface of the stone, tiles and other requirements of surface roughness. 2. Add component B hardener component A 1-2 parts per 100 parts gum, fast fully mixed. 3, quickly tuned glue evenly on both sides to be sticky, soft reduction aligned position, in front of the uncured Do not allow the relative displacement of the two surfaces to be glued. 4, the curing time depending on the ambient temperature, curing agent varies; please do first small test before construction, in order to grasp the relationship between the size and construction of the gel amount of time, between the amount of curing agent. Storage: 1, stored in a cool dry place, and not allow direct sunlight. 2, away from sources of ignition source. 3. Avoid contact with phenol, gangue and other corrosive media, in order to avoid damage to the iron drums, meet the above conditions can be stored unopened products a year. Standard: Press the "stone walls with epoxy adhesive" standard testing.